Wood and resin jewelry is a beautiful combination that has become increasingly popular in recent years. The combination of natural wood and colorful, translucent resin creates a unique and eye-catching look that is perfect for jewelry making. In this blog, we will explore the process of making wood and resin jewelry, including the supplies needed, techniques, and tips for creating beautiful pieces.


Supplies Needed

To make wood and resin jewelry, you will need the following supplies:
  • Large mold at least 1/4 inch deeper than your wood slices
  • Mold Release
  • Clear craft resin
  • Mixing Cups
  • Tree Wood Slice
  • Resin colors

Techniques

The process of making wood and resin jewelry involves pouring resin into a mold that contains a piece of wood. The resin is then allowed to cure, creating a hard, glossy surface that encapsulates the wood. The result is a beautiful piece of jewelry that showcases the natural beauty of wood and the vibrant colors of resin.To make wood and resin jewelry, follow these steps:
  1. Prepare your wood slices by sanding them smooth and drilling a hole for the jump ring.
  2. Apply mold release to the mold to prevent the resin from sticking.
  3. Mix the clear craft resin according to the manufacturer's instructions.
  4. Add resin color to the mixture, if desired.
  5. Pour the resin into the mold, filling it about 1/4 inch deep.
  6. Place the wood slice into the resin, making sure it is centered.
  7. Pour more resin over the wood slice until it is completely covered.
  8. Allow the resin to cure according to the manufacturer's instructions.
  9. Once the resin has cured, remove the piece from the mold and attach a jump ring.

Tips

Here are some tips to help you create beautiful wood and resin jewelry:
  • Use a large mold that is at least 1/4 inch deeper than your wood slices to ensure that the resin covers the wood completely.
  • Sand the wood slices smooth before adding them to the mold to ensure a flat surface.
  • Use mold release to prevent the resin from sticking to the mold.
  • Mix the resin thoroughly to ensure that it cures properly.
  • Add resin color to create a unique and colorful piece of jewelry.
  • Allow the resin to cure completely before removing the piece from the mold.
  • Attach a jump ring to the piece once it has cured to create a necklace or other piece of jewelry.

In conclusion, wood and resin jewelry is a beautiful combination that is perfect for creating unique and eye-catching pieces of jewelry. With the right supplies, techniques, and tips, you can create beautiful wood and resin jewelry that showcases the natural beauty of wood and the vibrant colors of resin.